Kategori: Genel

NVIDIA Jetson TX2 için Inception İndirimi Başladı

Inception programına üye olan firma yetkili personelin;

Pro Forma istiyor musunuz?

Jetson ile Bilgisayar Arasında Ethernet Bağlantısı Yapma

If you are running Ubuntu on your PC, or if you use another operating system that has NetworkManager, then you can make your PC act as a router with just a few clicks in a graphical user interface. Just connect the Jetson board to the PC with an Ethernet cable (patch or crossover — does not matter with modern Ethernet devices) and create an Internet Connection Sharing connection in 6 steps:

  1. Open the Network Menu on your panel (the menu where you usually select wireless connections) and select “Edit connections”
  2. Click on the “Add” button
  3. Select “Ethernet” from the drop-down menu (most likely already selected) and click “Create…”
  4. Give the connection a nice name, e.g. “Jetson”
  5. Open the IPv4 tab.
  6. In the “Method” box, select “Shared with other computers” and click the “Save…” button

Now whenever you plug in the Ethernet cable, both your PC and Jetson will be waiting for a router. You then need to select the “Jetson” connection so that your PC would act as a router for Jetson.

Kaynak: http://elinux.org/Jetson/Remote_Access

NVIDIA Jetson TX1 OpenCV 3.1 Kurulumu

OpenCV 3.1 kurulumu için aşağıdaki adresdeki adımları takip edebilirsiniz.


OpenCV 3.1 ile board kamerası kullanımı:


Performans testi


Scroll to top